Brand new development from Specialized ECU Repair, we have researched and re design the old and unreliable ML3.1 DME. Our years of experience rebuilding the old design allow us to understand it's weaknesses and benefits.
Our design benefits from 99% of SMD/SMT " surface mounted devices" installed on the board also metallized thru holes for guaranteed reliability and no future cold solder joints. Using SMD/SMT components makes our new design perform much better than the original DME by better handle of current and temperature allowing the engine to operate much better with better injector and spark control.
Our new DME allows for the replacement of factory chips or "Eproms" allowing you to install your favorite performance Chips! 100% compatible with your 911 3.2 Carrera, plug and play, no modifications necessary.
Common Symptoms of a Bad Porsche 911 3.2 Carrera ECU/ DME:
Car will not start.
Misfires/ Stalls.
No Signal to Coil/ No Spark.
No Injector Pulse/ No Fuel.
Occasional Erratic Idle.
Porsche 911 3.2 Carrera ECU/DME Part Numbers:
0 261 200 050
0 261 200 051
0 261 200 082
0 261 200 085
0261200050
0261200051
0261200082
0261200085
911 618 111 00
911 618 111 01
911 618 111 02
911 618 111 03
911 618 111 04
911 618 111 05
911 618 111 07
911 618 111 08
911 618 111 09
911 618 111 14
911 618 111 20
911 618 111 16
911 618 111 12
911 618 111 18
91161811100
91161811101
91161811102
91161811103
91161811104
91161811105
91161811107
91161811108
91161811109
91161811114
91161811120
91161811116
91161811102
91161811108
CORE CHARGE
CORE CHARGE is a deposit that we collect to ensure that the exchange is complete. When we receive your Porsche 911 3.2 Carrera (0 261 200 082) DME/ ECU core at our office, we will refund the core charge to your credit card.
Your old DME/ ECU must be returned within 5 days of the delivery date to receive a refund of the core deposit. You may be subject to additional charges, in addition to a canceled warranty, if you do not return your old DME/ ECU within 5 days of receiving the new rebuilt DME/ ECU.
DME/ ECU's returned in NON-REBUILDABLE condition, such as HEAVY WATER DAMAGE, FIRE DAMAGE or INTERNALLY MANIPULATED; may receive a partial refund or no refund at all.
FOR INTERNATIONAL SHIPMENTS ONLY There is an additional $ 100 core charge included in shipping charges that count towards the core charge deposit. Once we receive the DEFECTIVE ECU core back, you will be refunded the original core charge plus the additional $ 100.
INSTRUCTIONS
The DME/ ECU of your 911 Carrera 3.2 is located under the driver's seat, to remove it you will need the following tools:
Ratchet - Small extension - 10 MM socket
Start by pushing the seat back as far as you can, also up if the seats are electric. Fold or remove the floor mat on the driver's side as it may interfere with the removal of the DME/ ECU.
Locate and start removing the four 10 mm nuts and washers that hold the DME/ ECU against the bolts on the floor board.
The main wiring for the DME/ ECU will be maintained by a strip attached with a 10 mm nut, remove the nut and undo the strap that holds the harness.
Once the DME/ ECU is released from its location, carefully remove the main connector by pushing the silver tab on the side of the DME and carefully pulling the main connector.
FEATURES
Porsche 911 3.2 Carrera ECU DME Bosch 0 261 200 050 - Exchange NEW DESIGN
